The best way to determine the correct size for Shelterlogic
replacement covers is to measure the old cover. This should be done very
carefully. Enlist a friend to help you hold the tape measure flat and even
along the edge of the tarp if you're working with a large piece. Make a note of
the length and width of the tarp. Now, add four to six inches to these
measurements. This will allow for the seam. When you look at the underside of
the tarp you will probably notice that it has been folded over to create the
seam. Tarp measurements include the length of the folded seam.
If you don't have the old tarp on hand to measure, you'll
need to measure the frame very carefully to determine the correct size for your
Shelterlogic replacement covers. If you have a peaked roof, measure both sides
of the roof and add these together to get the total measurement for that side
of the canopy. Never measure straight across an edge unless it truly sits straight
on the frame. Any area where the tarp sits at an angle, you should measure
across the angle. As with the previous tarp measurement, add four to six inches
to the area that you want the tarp to actually cover.
Once you have the measurements, you can begin shopping for
other features that you want from your Shelterlogic replacement covers.
Consider things like extra waterproofing and fireproofing. You can also choose
covers in a variety of festive colors and patterns. The classic red and white
stripe always evokes the mood of a carnival or festival. Clean white is ideal
for outdoor weddings and formal events. With the measurements in hand, you can
order multiple covers to suit a variety of needs. With extra covers on hand,
you'll always be safe in case of a tear or accident that damages the first one.
Shop Shelter Logic Covers Here: http://www.canopiesandtarps.com/shelter-logic-replacements.html
0 comments:
Post a Comment